Home/Products/Encoder Signal Processing/EasyTrigger

ENCODER POSITION TRIGGER CONTROLLER

EasyTrigger

Encoder Position Trigger

Outputs trigger signals to line-scan cameras and lighting, synchronized to encoder position.

Models2CH4CH8CH
EasyTrigger Encoder Position Trigger
~20 MHzEncoder input (×4 count)
~8 CHMulti-channel trigger
2 MHzMax trigger rate per channel
100 nsDelay / pulse-width resolution

THE PROBLEM

When conveyor speed changes, time-based capture produces uneven image spacing.

HOW SYNEX SOLVES IT

Triggers cameras and lighting by encoder position, so images stay evenly spaced at any speed.

Key features

01

Position-based trigger

Set start, end and interval in encoder counts. Independent interval per channel.

02

Per-channel delay, width, polarity

Delay 0–6.5 ms, width 200 ns–6.5 ms (100 ns steps), Active High/Low.

03

Virtual trigger

Generate real triggers from a virtual encoder (0.1 Hz–40 MHz).

04

Versatile outputs

Differential, LVDS, TTL and open-drain outputs on every channel simultaneously.

05

Trigger integrity monitoring

Verifies its own output count and flags errors on over-speed or position overrun.

06

Easy setup

Dedicated GUI or ASCII commands. Settings are stored and restored at power-up.

Configuration software — per-channel parameter settings

Software

Software

Configuration software — per-channel parameter settings

How it works

EncoderA/B/Z differential (virtual trigger)
EasyTriggerPosition compare · Trigger generation
CH1Camera
CH2Camera
CHnLighting

Encoder position

StartEnd Interval Trigger output Width Delay

Specifications

Encoder inputA/B/Z differential, up to 20 MHz (×4), analog option
Channels2 / 4 / 8 (by model)
Trigger outputDiff · LVDS · TTL · Open-drain (by model)
Delay / widthDelay 0 – 6.5 ms, width 200 ns – 6.5 ms
Virtual triggerVirtual encoder 0.1 Hz – 40 MHz (0.1 Hz steps)
InterfaceRS-232, 115200 bps, ASCII commands
Power12–24 VDC, 0.5 A @ 24 VDC
Size / weight160 × 83 × 40 mm · 500 g

※ Specifications are subject to change without notice. Contact us for detailed specifications.

Applications

Industry

Semiconductor · Display · Battery
Semiconductor & display surface inspectionBattery electrode roll-to-roll inspectionPCB inspectionMulti-camera synchronized capture

Use cases

  • Line-scan capture at each stage position in wafer/panel inspection
  • Electrode roll-to-roll surface inspection with synchronized multi-camera capture

Let’s check if it fits your machine

Tell us your machine setup and signal specs — we’ll start by reviewing whether it applies.